ARC Flash — Boilersuits
-
-
Fire Retardant, Hi Vis, Anti-static, ARC Flash Orange Coverall
RIS-3279-TOM issue 1 for use on or around railway lines
300gsm 60% Modacrylic ,40% Cotton
2 hip pockets
Large bellows pocket to each leg with hook and loop closure flap
Right leg mobile phone pocket with hook and loop closure flap
All pocket flaps with Retro-reflective tape feature.
Internal knee pad pouches
Large qualifying icons on left leg pocket
Mandarin collar
EN ISO 13688:2013 - General requirements for protective clothing
EN ISO 20471:2013 Class 3 - Test method for high visibility – RIS-3279-TOM Issue 1
EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay
EN 1149-5:2008 - Anti Static - Material performance and design requirements
EN ISO 11611:2015 (Class 1 A1 A2) - Protective clothing for use in welding
EN ISO 11612:2015 (A1 A2 B1 C1) - Protection against heat and flame
ARC FLASH
IEC 61482-2:2009 - Performance requirements and design requirements
EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing
EN 61482-1-1:2009 (EBT50 = 9.3 Cal/cm2) - Open Arc testing
Each garment style is independently tested to both box and open ARC standards.
Click ARC production is covered by article 11B certification. Fire retardant, Anti-static, ARC Flash coverall.
300gsm 60/40 Modacrylic/cotton blend.
Triple stitch construction.
2 hip pockets.
Rear patch pocket with hook and loop closure flap.
Large bellows pocket to each leg with hook and loop closure flap.
Right leg mobile phone pocket with hook and loop closure flap.
All pocket flaps with Retro-reflective tape feature.
Internal knee pad pouches.
Large qualifying icons on left leg pocket.
EN ISO 13688:2013 - General requirements for protective clothing
EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay
EN 1149-5:2008 - Anti Static - Material performance and design requirements
EN ISO 11611:2015 (Class 1 A1 A2) - Protective clothing for use in welding
EN ISO 11612:2015 (A1 A2 B1 C1) - Protection against heat and flame
ARC FLASH
IEC 61482-2:2009 - Performance requirements and design requirements
EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing
EN 61482-1-1:2009 (ATPV = 10.8 Cal/cm2) - Open Arc testing
Each garment style is independently tested to both box and open ARC standards.
Click ARC production is covered by article 11B certification.
Does NOT conform to EN ISO 20471 Fire Retardant, Hi Vis, Anti-static, ARC Flash coverall.
300gsm 60/40 Modacrylic/cotton blend.
Inherently flame retardant.
Fire Retardant properties will not diminish with repeated laundering.
Triple stitch construction.
2 hip pockets.
Large bellows pocket to each leg with hook and loop closure flap.
Right leg mobile phone pocket with hook and loop closure flap.
All pocket flaps with Retro-reflective tape feature.
Internal knee pad pouches.
Large qualifying icons on left leg pocket.
EN ISO 13688:2013 - General requirements for protective clothing
EN ISO 20471:2013 Class 3 - Test method for high visibility
EN 1149-3:2004 - Anti Static - Test methods for measurements of charge decay
EN 1149-5:2008 - Anti Static - Material performance and design requirements
EN ISO 11611:2015 (Class 1 A1 A2) - Protective clothing for use in welding
EN ISO 11612:2015 (A1 A2 B1 C1) - Protection against heat and flame
ARC FLASH
IEC 61482-2:2009 - Performance requirements and design requirements
EN 61482-1-2:2007 (Class 1 = 4kA) - Box Arc testing
EN 61482-1-1:2009 (ATPV = 10.8 Cal/cm2) - Open Arc testing
Each garment style is independently tested to both box and open ARC standards.
Click ARC production is covered by article 11B certification. Fire Retardant, Hi Vis, Anti-static, ARC Flash coverall.
300gsm 60/40 Modacrylic/cotton blend.
Inherently flame retardant.
Fire Retardant properties will not diminish with repeated laundering.
Triple stitch construction.
2 hip pockets.
Large bellows pocket to each leg with hook and loop closure flap.
Right leg mobile phone pocket with hook and loop closure flap.
All pocket flaps with Retro-reflective tape feature.
Internal knee pad pouches.
Large qualifying icons on left leg pocket.
EN ISO 13688:2013 - General requirements for protective clothing
EN ISO 20471:2013 Class 3 - Test method for high visibility
EN 1149-5:2018 - Anti Static - Material performance and design requirements
EN ISO 11611:2015 (Class 1 A1 A2) - Protective clothing for use in welding
EN ISO 11612:2015 (A1 A2 B1 C1 F1) - Protection against heat and flame
ARC FLASH
EN 61482-2:2020 - Performance requirements and design requirements
(ELIM = 14 Cal/cm2)
(ATPV = 17 Cal/cm2)-
4 Products
-
With over 20,000 products in stock at our warehouse, our team are here to help & find you the right product.